Imagine focusing when only considering geometric optics, as in Figure 4.23(a). One of the consequences of diffraction is that the focal point of a beam has a finite width and intensity distribution. (b) Terms and symbols used in discussion of resolving power for a lens and an object at point P (credit a: modification of work by “Infopro”/Wikimedia Commons). The laser beam is expanded through a telescope to make D much larger and θ θ smaller.įigure 4.22 (a) Two points separated by a distance x and positioned a distance d away from the objective. This is done for laser light sent to the moon to measure its distance from Earth. However, for long-distance transmission of laser beams or microwave signals, diffraction spreading can be significant ( Figure 4.21). This spreading is impossible to observe for a flashlight because its beam is not very parallel to start with. Take, for example, a laser beam made of rays as parallel as possible (angles between rays as close to θ = 0 ° θ = 0 ° as possible) instead spreads out at an angle θ = 1.22 λ / D θ = 1.22 λ / D, where D is the diameter of the beam and λ λ is its wavelength. The beam spreads out with an angle θ θ given by Equation 4.5, θ = 1.22 λ / D θ = 1.22 λ / D. Any beam of light having a finite diameter D and a wavelength λ λ exhibits diffraction spreading. What is the angular resolution of the Arecibo telescope shown in Figure 4.20 when operated at 21-cm wavelength? How does it compare to the resolution of the Hubble Telescope?ĭiffraction is not only a problem for optical instruments but also for the electromagnetic radiation itself. The accepted criterion for determining the diffraction limit to resolution based on this angle is known as the Rayleigh criterion, which was developed by Lord Rayleigh in the nineteenth century. It can be shown that, for a circular aperture of diameter D, the first minimum in the diffraction pattern occurs at θ = 1.22 λ / D θ = 1.22 λ / D (providing the aperture is large compared with the wavelength of light, which is the case for most optical instruments). Just what is the limit? To answer that question, consider the diffraction pattern for a circular aperture, which has a central maximum that is wider and brighter than the maxima surrounding it (similar to a slit) ( Figure 4.18(a)). Telescopes are also limited by diffraction, because of the finite diameter D of the primary mirror. Thus, diffraction limits the resolution of any system having a lens or mirror. Thus, light passing through a lens with a diameter D shows this effect and spreads, blurring the image, just as light passing through an aperture of diameter D does. Be aware that the diffraction-like spreading of light is due to the limited diameter of a light beam, not the interaction with an aperture. The acuity of our vision is limited because light passes through the pupil, which is the circular aperture of the eye. This limit is an inescapable consequence of the wave nature of light.ĭiffraction limits the resolution in many situations. If they are closer together, as in Figure 4.17(c), we cannot distinguish them, thus limiting the detail or resolution we can obtain. The pattern is similar to that for a single point source, and it is still possible to tell that there are two light sources rather than one. How does diffraction affect the detail that can be observed when light passes through an aperture? Figure 4.17(b) shows the diffraction pattern produced by two point-light sources that are close to one another. (c) If the sources are closer together, they cannot be distinguished or resolved. (b) Two point-light sources that are close to one another produce overlapping images because of diffraction. Figure 4.17 (a) Monochromatic light passed through a small circular aperture produces this diffraction pattern.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |